MKT

Welded steel-structure. The plate roll is placed on the rollers, and you can easily unroll the desired quantity of plate along its external nappe. Smaller rolls are conveyed with that stand , which you turn in horizontal position when you arrive at workplace.

"T" Fly-wheeled unrolling stand

Welded steel-structure. We have to place the apparatus inside the roll plate manually, then flex in the four holding arm by the driving arm. The structure of apparatus and axial bear behind the pressing nut makes possible to achieve high flexing force. The flexed roll plate can be placed back on the unroll stand with the help of crane or fork-lift truck. You can pull down the plate continuously from the stand with a puller machine, an adjustable disc break prevents the overrun.

"MT" Powered unrolling stand

Welded steel-structure. We have to place the apparatus inside the roll plate manually, then flex in the four holding arms by the driving arm. The structure of apparatus and the axial bear behind the pressing nut makes possible to achieve high flexing force. The flexed roll plate can be placed back on the unroll stand with the help of crane or fork-lift truck. You can pull down the plate continuously from the stand with a puller machine, there is a sensor to prevent the overrun, by switching on and off the motor.

"ET" Single arm decoiler

Welded steel construction. It is possible to put up the sheet coil to the hasp with fork lifting truck or with crane, and after that to strain the coil in, with the stretching-screw on the end of the axis. A suitable pull-down machine can decoil the sheet continually from the stand. A regulation disc brake prevents the overrunning. A pneumatic clamping hinders the explosion of the sheet during the inleading.

"EMT" Single arm powered upcoiler

Welded steel construction. After threading the sheet it is possible to coil up the sheet by the help of the motor.
After loosing the end of the sheet a hydraulic work roll dresses down the coiled sheet coil.