Edge bending machines

MB POKRIVI

XES/1-3m

Welded steel structure. The operation of the machine is based on tilting table principle. The fixing of plate is done through pressing down the arm of eccentric. The workpiece stays clamped until the arm is pulled up.  The moving up of upper bridge is linear motion, a gas telescope balances its movement, making the operation extremely easy. Springy links assist the lifting up of the tilting table The thickness of plate, the sharpness of bent edge and the position of clamping are adjustable with arrester.
Shared sections only on the depression beam in basic case. It is possible to order separate manual adjustable rear back-stop table from 5 to 1000mm in options.

Technical data

XES/1m

XES/1,25m

XES/1,5m

XES/2m

XES/2,5m

XES/3m

Bendable plate thickness  (400N/mm2)

2,2 mm

2 mm

1,75 mm

1,5 mm

1,25 mm

1 mm

Useful lenght (changeable)

1020 mm

1270 mm

1520 mm

2020 mm

2520 mm

3020 mm

       

MB POKRIVI

Bulgaria, Sofia,   tel. +359 899 188 883  

    For more information:  E-mail: office@okgepbg.com